Cork rolls are becoming increasingly popular as a flooring option for good reason. Here are some key pros and cons of using cork rolls as flooring:

Pros:
Ecology: Cork is a natural and renewable material as it is extracted from the bark of the cork oak tree without harming the tree.

Thermal insulation: Cork has excellent insulating properties that help keep the room warm.

Sound insulation: Cork dampens noise well, which is useful in multi-storey houses or apartments.

Comfort: Cork floors are soft and flexible, which increases walking comfort and reduces foot fatigue.

Moisture resistance: Cork is naturally moisture resistant, making it suitable for bathrooms and kitchens, but requires additional impregnation.

Hypoallergenicity: Cork is an antistatic and antibacterial material, which can be beneficial for allergy sufferers.

Ease of installation: Cork rolls are easy to install, which allows for quick and relatively inexpensive flooring.
Disadvantages:
Price: High-quality cork can be expensive, both in terms of material and installation.
Sensitivity to damage: While cork is flexible, it is also soft, making it susceptible to scratches and dents.
Maintenance: Cork floors require regular maintenance and periodic waterproofing to maintain their properties.
Effects of the sun: Prolonged exposure to sunlight can cause the color of the cork to fade.
Complex repair: Damage to cork surfaces can be more difficult to repair compared to other flooring materials.
Summary
Cork rolls as a flooring option offer many advantages, particularly in terms of comfort, insulation and ecology. However, it is also worth considering the potential disadvantages to decide whether cork is right for your interior design and lifestyle. Proper protection and care can significantly extend the life of cork floors, and their natural beauty and functionality can be a great addition to any home.

Installing cork rolls on the wall is a great way to add a natural look, sound and thermal insulation to your interior. Here's a guide on how to install cork rolls on the wall:

Materials and tools:
Cork rolls
Cork glue (specialized contact glue or assembly glue)
Paint roller or brush
Wallpaper cutting knife
Measure
Level
Pencil
Smooth spatula or pressure roller
Step by step:
Surface preparation:

Make sure the wall is clean, dry and smooth. Remove any irregularities, dust and grease.
If the wall is painted, make sure the paint adheres well. If not, remove any flaking and prime the wall.
Planning the installation:

Carefully measure the surface of the wall where you will be applying the cork.
Cut the cork rolls to the right dimensions, leaving a small allowance for any corrections.
Applying the adhesive:

Apply the cork adhesive to the wall and the back of the cork roll. Follow the adhesive manufacturer’s instructions – most often it is recommended to apply the adhesive to both surfaces and wait a few minutes for it to become tacky.

Use a paint roller or brush to spread the adhesive evenly.

Mounting the cork:

Start at the top of the wall, slowly pressing the cork roller against the wall surface.
Use a spirit level to ensure the roller is glued evenly.

Once the cork is applied to the wall, use a pressure roller or smooth spatula to press the cork down firmly and remove any air bubbles.

Corrections and finishing:

If you notice that the cork is not sticking perfectly in some places, gently lift it up and apply more adhesive.
Trim off any excess cork around the edges with a wallpaper cutter.

Drying time:

Leave the cork surface until the adhesive has completely dried. Drying time depends on the type of glue used – it can take from a few hours to 24 hours.

Tips:
Work in a well-ventilated area, especially if you are using glue with a strong smell.

Always check the glue manufacturer's instructions and follow them.
Working with two people can make installation easier, especially on large surfaces.
Installing cork rolls on the wall can bring many benefits, from aesthetic to functional. This will give the interior a warm and distinctive look, and will also improve its acoustic and thermal insulation.

Cork roll is a popular material used to create cork boards. It is a thin sheet of cork sold in rolls that can be cut to size and mounted on a wall or frame. These boards are used to pin notes, photos, calendars, and other items using pins.

How to Choose a Cork Roll:
Thickness: Typical thickness of cork roll is between 2mm and 6mm. Thicker rolls are more durable and hold pins better.
Size: Cork rolls come in a variety of widths and lengths. Make sure to choose the right size for the surface you want to cover.
Cork Quality: High-quality cork is more durable and less likely to crumble.
Adhesion: Some cork rolls already have adhesive on the backing, making them easier to mount. If not, you will need a suitable adhesive to attach the cork to the surface.
How to install cork roll:
Surface preparation: Make sure the surface you are applying the cork to is clean, dry and smooth.
Cutting the cork: Cut the cork roll to the required size using a wallpaper knife or scissors.
Applying the glue: If the roll does not have an adhesive layer, apply the glue evenly to the underside of the cork or directly to the surface you are installing it to.
Securing the cork: Carefully place the cork on the surface, starting at one end and slowly moving along to avoid air bubbles.
Finish: Press the cork firmly onto the surface using a roller or clean cloth to ensure it adheres well.
Where to buy cork roll:
Cork rolls can be purchased from DIY stores, home improvement stores and online. Popular stores include Leroy Merlin, Castorama, Obi and various e-commerce platforms such as Allegro and Amazon.

Application:
Cork boards made from cork rolls are ideal for offices, schools, homes and wherever you need a convenient place to pin notes and information. They are aesthetic, functional and easy to make yourself.